|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE 1206RGBCT-CA RED GREEN BLUE Features 3.2mmx1.5mm SMT LED, 0.68mm THICKNESS. LOW POWER CONSUMPTION. ONE RED, ONE GREEN AND ONE BLUE CHIPS IN ONE PACKAGE. C-AN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. PACKAGE : 3000PCS / REEL. Description The Red source color devices are made with DH InGaAIP on GaAs substrate Light Emitting Diode. The Green source color devices are made with GaP on Sapphire Light Emitting Diode. The Blue source color devices are made with GaN on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electriC-Ally grounded. Package Dimensions Notes: 1 All dimension units are millimeters. 2.All dimension tolerance is 0.2mm unless otherwise noted. 3.An epoxy meniscus may extend about 1.5mm down the leads. 4.Burr around bottom of epoxy may be 0.5mm max.. SPEC NO: A1329 APPROVED: REV NO: V1 CHECKED: DATE: MAY/05/2006 DRAWN: PAGE: 1 OF 4 Selection Guide Iv (mcd) Part No. Lens Type Dice Code J 1206RGBCT-CA WATER CLEAR K L RED (InGaAIP) Min. 90 125 160 Max. 125 160 210 @ 20mA Dice BLUE (GaN) Code H I J Min. 55 70 90 Max. 70 90 125 120 Viewing Angle 2 1/2 Dice GREEN (GaP) Code M N O Min. 210 276 355 Max. 276 355 460 Note: 1. 1/2 is the angle from optiC-Al centerline where the luminous intensity is 1/2 the optiC-Al centerline value. ElectriC-Al / OptiC-Al Characteristics at TA=25C Device Symbol Parameter Code A D Dominate Wavelength C-Apacitance A B VF Forward Voltage C 2.0 2.2 J K IR Reverse Current 10 3.4 3.6 10 3.6 3.8 J K 3.4 3.6 10 3.6 3.8 uA VR = 5V B C C Typ. 621 624 627 15 1.6 1.8 1.8 2.0 H I Max. 624 627 630 Code F G H Typ. 515 518 521 45 3.0 3.2 3.2 3.4 H I Max. 518 521 524 Code D E F Typ. 464 467 470 110 3.0 3.2 3.2 3.4 V IF=20mA Max. 467 470 473 pF VF=0V;f=1MHz nm IF=20mA Red Device Green Device Blue Units Test Conditions Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Red 75 30 160 Green 95 25 150 5 -40C TO +80C Blue 114 30 160 Units mW mA mA V SPEC NO: A1329 APPROVED: REV NO: V1 CHECKED: DATE: MAY/05/2006 DRAWN: PAGE: 2 OF 4 RED GREEN BLUE 1206RGBCT-CA Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level :90% LTPD :10% No. 1 Items Reflow Test Condition Temp:240 5 Min.5 sec. Test Hours/Cycles 6 Min. Sample Size 22Pcs. Ac/Rc 0/1 H:+100 2 Temperature Cycle 15 min. 5 min L:-40 15 min. 300 Cycles 22Pcs. 0/1 3 Thermal Shock H:+100 5 min. 10 sec. L:-10 5 min. Temp.:100 Temp.:-55 IF=20mA 85 /R.H85% 300 Cycles 22Pcs. 0/1 4 5 6 7 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature/High Humidity 1000Hrs. 1000Hrs. 1000Hrs. 1000Hrs. 22Pcs. 22Pcs. 22Pcs. 22Pcs. 0/1 0/1 0/1 0/1 SPEC NO: A1329 APPROVED: REV NO: V1 CHECKED: DATE: MAY/05/2006 DRAWN: PAGE: 3 OF 4 1206RGBCT-CA Recommended Soldering Pattern (Units : mm) Tape SpecifiC-Ations (Units : mm) SPEC NO: A1329 APPROVED: REV NO: V1 CHECKED: DATE: MAY/05/2006 DRAWN: PAGE: 4 OF 4 |
Price & Availability of 1206RGBCT-CA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |